Super U Drain T6

Behind the kerb, under the footpath, round the campus, a lighter U-drain for a 2.4 ton wheel load that doubles as a cable trench.

Features

• Cable trench: Power and telecom cables sit on trays, heavy cables lie in sand bedding, all under a closed plain lid: no water gets in, no repeated digging.
• Storm water: With a perforated lid, rain leaves the footpath and runs along a smooth invert.
• 2.4 ton wheel load: 1.2 T front axle, 4.8 T rear: lanes, footpaths, campuses, parking.
• Self-compacting concrete: Dense, smooth and factory-cured, so less silt and easy cleaning.
• Flush lids: Lids seat in the rebate, with nothing to catch a foot.
• Quick to lay, sealed joints: Light units lift on M12-55 inserts; a 20 × 25 mm mortar pocket seals every joint.
• A mortar pocket at every joint
• Two metres long
• The section for this size
• M12-55 lifting insert
• Covers that fit the rebate
• Cables inside, cover on
• Or storm water below

Applications

• Edge of the road, behind the kerb: Under footpaths, along campuses and parking, pedestrians and light vehicles on top.
• Where the water goes: Along a riverside walk: benches and lamps on the path, the drain beside it, and the outlet discharging into the river.
• How the line gets its fall: The unit keeps one section; the fall comes from the PCC bed, cast to the gradient (about 1 in 200). Each unit is set to its invert on a string line, laid from the downstream end upward, so the water always runs to the outfall.

What it prevents

• Flooded footpaths: Rain runs through the lids into a smooth channel, not across the walkway.
• Damaged cables: Power and telecom lines sit on brackets in a covered duct, no more repeated digging.
• Trip hazards: Lids seat flush in the rebate; nothing to catch a foot.
• Slow in-situ work: Lighter units lift with M12-55 inserts and lay quickly.

Installation

1. Excavate: Trench to line and level.
2. PCC bed: 100 mm thick with the required slope, 100 mm projection each side.
3. Bed & place: 20–25 mm bedding mortar, place the unit by its M12-55 inserts.
4. Joint & cover: Mortar the joints, backfill, and set the lids.

Frequently asked questions

What is the Super U Drain T6?

Behind the kerb, under the footpath, round the campus, a lighter U-drain for a 2.4 ton wheel load that doubles as a cable trench. It is made by Super Cement Articles (SCA), a precast and prestressed concrete manufacturer established in 1982 with six plants in Nashik (Maharashtra) and Unnao / Lucknow (Uttar Pradesh).

Where is the Super U Drain T6 used?

Edge of the road, behind the kerb, Under footpaths, along campuses and parking, pedestrians and light vehicles on top. Where the water goes, Along a riverside walk: benches and lamps on the path, the drain beside it, and the outlet discharging into the river. How the line gets its fall, The unit keeps one section; the fall comes from the PCC bed, cast to the gradient (about 1 in 200). Each unit is set to its invert on a string line, laid from the downstream end upward, so the water always runs to the outfall.

What sizes of Super U Drain T6 are available?

13 catalogue sizes, including 300x300, 300x450, 300x600, 450x450, 450x600, 450x750, 450x900, 600x400 and more. Every size is shown in 3D on the product page and in the SCA size range.

What problems does the Super U Drain T6 prevent?

Flooded footpaths: Rain runs through the lids into a smooth channel, not across the walkway. Damaged cables: Power and telecom lines sit on brackets in a covered duct, no more repeated digging. Trip hazards: Lids seat flush in the rebate; nothing to catch a foot. Slow in-situ work: Lighter units lift with M12-55 inserts and lay quickly.

How is the Super U Drain T6 installed?

1. Excavate, Trench to line and level. 2. PCC bed, 100 mm thick with the required slope, 100 mm projection each side. 3. Bed & place, 20–25 mm bedding mortar, place the unit by its M12-55 inserts. 4. Joint & cover, Mortar the joints, backfill, and set the lids.

Who manufactures the Super U Drain T6 in India?

Super Cement Articles (SCA), Nashik and Lucknow, 40+ years in precast, 3,50,000+ tonnes a year, BIS IS:12592 and ISO 9001 / 14001 / 45001 certified, designs to IS with Japanese precision in the detailing. Supplied pan-India.

How do I get a price for the Super U Drain T6?

Send the size, quantity and site location through the enquiry form on the page (drawings and CAD files can be attached), call +91 98502 25049 (Nashik) or +91 97941 80000 (Lucknow), or email info@supercementarticles.in. SCA replies within one working day.